GQ EMF Meter
(For EMF-360V2, EMF-360PlusV2, EMF-380V2, EMF-390)
Package Content
1. EMF meter main unit.
2. USB cable
3. Quick start guide.
Full User Guide
https://www.gqelectronicsllc.com/GQ-EMF-UserGuide.pdf
Operation Setup
1. Power on the unit. Pressing the power (S4) key for 3 seconds
will turn on the unit.
2. Check the battery level. Charge the battery fully if battery level
is low. It may take a few hours to get the battery fully charged.
Check the battery icon on the display. A fully charged battery
icon will be filled with solid color, without flashing.
3. Set the backlight timeout in seconds in order to minimize the
power consumption.
4. Now the unit is ready for use. You should see the background
EMF/EF reading.
Software
The package includes optional free utility software, the GQ EMF Pro. You
can use this utility to view and analyze the data on a PC. Users can
download the USB driver and software from GQ Software Download page:
https://www.gqelectronicsllc.com
The driver: USB Driver, CH341SER.exe
The software: GQ EMF PRO
The demo software for EMF Meter: Demo and Simulation
Software, EMF360_380_Demo.exe
2
To Next Page
Loading...
Need help?
General
