EasyManua.ls Logo

Graco 4EVER DLX EXTEND2FIT - Rear-Facing; 3-A Rear-Facing Use

Graco 4EVER DLX EXTEND2FIT
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Rear Facing
3-A
3-A Rear-Facing Use
Lower Anchor Attachment
Rear-Facing:
4-50 lb (1.8-22.5 kg) and
whose head is at least 1”
(2.5 cm) below the headrest
adjustment handle*
Infants who weigh less than
22 lb (10 kg) MUST be rear-facing.
Place car seat rear-facing in the vehicle back
seat.
Make sure lower anchor strap or vehicle seat
belt is routed through the rear-facing belt path
marked with a blue label.
Install this car seat tightly in your vehicle. Car
seat should not move at the rear-facing belt
path more than 1” (2.5 cm) from side to side,
front to back.
Check recline level making sure the bubble is
within the blue area. Vehicle MUST be on level
ground.
Visit www.gracobaby.com and
the Graco
®
Premier 4Ever
®
DLX Extend2Fit
®
featuring Anti-
Rebound Bar seat product page
to view installation videos.
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 34NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 34 8/28/20 3:50 PM8/28/20 3:50 PM

Other manuals for Graco 4EVER DLX EXTEND2FIT

Related product manuals