Graco 4EVER DLX EXTEND2FIT - 4-C Install Forward-Facing with Vehicle Seat Belt

58
Forward-Facing with Seat Belt
4-C
4-C Install Forward-Facing with
Vehicle Seat Belt
1. Store Lower Anchor Connectors in Storage
Location
Attach lower anchor connectors to the plastic bars
as shown.
3. Unhook Tether Strap From Storage
Unhook tether and lay it in the seat.
2. Remove Anti-Rebound Bar
DO NOT use the Anti-Rebound Bar in forward-
facing mode. The Anti-Rebound Bar can ONLY be
used in rear-facing mode.
See section 9 to remove the Anti-Rebound Bar.
Visit www.gracobaby.com and
the Graco
®
Premier 4Ever
®
DLX Extend2Fit
®
featuring Anti-
Rebound Bar seat product page
to view installation videos.
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 58NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 58 8/28/20 3:50 PM8/28/20 3:50 PM