Graco 4EVER DLX EXTEND2FIT User Manual

Important
1
Important
1
9
LATCH consists of lower anchors and a tether anchor, which are built in
to your vehicle, and a lower anchor attachment and a tether that are built
in to your car seat. The lower anchor attachment is used INSTEAD of the
vehicle’s seat belt to secure the child seat to the vehicle. The tether is used
IN ADDITION to the lower anchor attachment OR the vehicle’s seat belt to
secure a forward-facing car seat to the vehicle.
Review your vehicle’s owner manual for exact location and use.
What is LATCH?
Vehicle’s Tether
Anchor
Vehicle’s Lower
Anchor
Typical seat in a passenger
vehicle. Other vehicle types may
have different lower anchor and
tether anchor locations.
Vehicle Seat Bight
11”
(28 cm)
NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 9NWL0001153323A 4Ever DLX Extend2Fit USA ENG R07.indd 9 8/28/20 3:50 PM8/28/20 3:50 PM

Graco 4EVER DLX EXTEND2FIT Specifications

General

Weight Range	4-120 lbs
Rear-Facing Weight Limit	4-50 lbs
Forward-Facing Weight Limit	22-65 lbs
Booster Mode Weight Limit	40-120 lbs
Harness Type	5-point harness
Recline Positions	6
Headrest Positions	10
Cup Holders	2
Height Limit (Rear-Facing)	up to 49 inches
Height Limit (Forward-Facing)	up to 49 inches
Installation Method	LATCH or seat belt
Safety Features	Steel-reinforced frame
Extend2Fit Extension Panel	4-position