102
Harness Covers
Make sure that harness covers do not
interfere with placement of the chest clip at
armpit level.
To remove, undo the fastening strips and
remove.
Body Support
Use only in the rear-facing mode.
Body support must be used if shoulders are
below the lowest harness setting.
Never allow body support to bunch or fold
behind child.
Head Support
Use only in the rear-facing mode. To adjust
the support, pull up until desired height. Do
not use without the body support.
To install, thread the head support straps
through the headrest and use the fastening
strips to connect the straps together.
To remove, undo the fastening strips and
pull the straps out of the headrest.
8-A Accessories (on select models)
To Next Page
Loading...
