Need help?Do you have a question about the Graco deluxe series and is the answer not in the manual?
General| Harness Type | 5-point harness |
|---|---|
| LATCH System | Yes |
| Removable Cover | Yes |
| Machine Washable Cover | Yes |
| Headrest | Adjustable |
| Adjustable Harness | Yes |
| Category | Convertible Car Seat |
Details the car seat's approval to European Standard ECE R44.03 for group 0+.
States the seat is a Universal child restraint approved for general use in vehicles with specific safety belts.
Describes the Base Semi-Universal child restraint approved for general use and its compatibility with vehicle seat belts.
Covers safety: manual, baby handling, airbags, installation, harness, passenger safety, driving.
Guidance on using the car seat as an infant carrier, including handle positions and safety precautions.
Covers the importance of fitting the harness correctly for the baby's safety.
Advises on selecting the most secure location within the vehicle for the car seat.
Details the process of correctly installing the car seat and its base in the vehicle.
Explains how to release, adjust, and lock the car seat handle into different positions for carrying or stability.
Describes the procedure for connecting the car seat to its base unit, ensuring it locks securely.
Details the steps to release the car seat from its base using the release handle.
Step-by-step guide on adjusting harness slots, slackening straps, and reassembling strap ends onto the junction plate.
Differentiates between using lower and upper harness slots based on baby's size for secure fit.
Instructs on placing the car seat in forward-facing vehicle seats, avoiding airbag-equipped seats.
Lists unsafe locations, including seats with airbags, rear-facing, and side-facing vehicle seats.
Specifies the type of vehicle seat belts required for securing the car seat or base.
Guide on placing the car seat or base into a forward-facing vehicle seat, ensuring the handle is up and avoiding airbags.
Emphasizes the danger of facing the car seat forward, which can cause serious injury or death.
Details routing the shoulder and lap belts correctly, buckling the vehicle belt, and removing slack.
Explains adjusting the load leg on the base to the correct height and ensuring it's secure.
Instructions for placing the base, adjusting the load leg, and warnings about its placement on ledges.
Describes pulling lap belt through openings, sliding strap under guide, and tightening for secure base installation.
Warns against twisting vehicle or car seat straps and emphasizes keeping them flat for safety.
Details pushing seat onto base until click, checking secure latching, and avoiding use if not latched.
Instructions for folding the load leg for storage and tightening the vehicle belt to ensure the seat is secure.
Warns against leaving the car seat or base unsecured, as it can become a projectile in a crash.
Explains the level indicator's purpose, interpretation of colors, and warnings against incorrect recline positions.
Instructions on how to read the level indicator to ensure the safety seat is properly leveled for the child's safety.
Step-by-step guide on placing baby, fitting harness, buckling, and checking harness snugness.
Details how to move the handle and press the red button to open the harness buckle.
Reminds users to always fasten the harness securely and inspect it for wear, replacing parts if damaged.
Explains how to attach the Graco® car seat/carrier to specific pushchair models using a webbing strap.
Instructions for preparing the pushchair, securing the carrier to its arm bar/tray, and attaching the webbing strap.
Provides instructions for detaching the carrier from the pushchair by releasing the webbing and attachment latch.
Covers checking for damage, cleaning instructions for parts/straps, and advice on replacing worn or damaged components.
Recommends replacing seat/base after five years due to wear, standards changes, or post-crash.
To Next Page