10. Pull All of the EZ Tight™ UAS
Strap Slack to the Retractor Side
11. Activate the EZ Tight™ UAS
Retractor
Slide and release the gray EZ Tight™ UAS
retractor’s slider to remove the slack.
12. Tighten the EZ Tight™ UAS
Push down firmly on the car seat in the
locations shown and release. Do this until
the retractor no longer clicks (about 3-5
times).
Some vehicle seats will need more pressure
to tighten the EZ Tight™ UAS than others.
To Next Page
Loading...
