Graco Infant Restraint/Carrier - Harness Clip and Tightening

25
5. Snap harness clip pieces together .
6. Pull on harness adjustment strap to
tighten straps as shown . CHECK that
both straps are flat and snug on
shoulders and thighs.
7. Position harness clip in middle of chest,
level with armpits and away from the
neck . The symbol on the
harness clip should be level
with the armpits.
8. SAFETY CHECK:
a) CHECK that harness straps are not twisted.
b) CHECK that the harness is snug. You
should not be able to pinch the harness if it
is snug. A snug strap should not allow any
slack. It lies in a relatively straight line without
sagging. It does not press on the child’s flesh
or push the child’s body into an unnatural
position .
g
r
a
c
o
b
a
b
y
.
c
o
m

g
r
a
c
o
b
a
b
y
.
c
o
m

g
r
a
c
o
b
a
b
y
.
c
o
m
