EasyManua.ls Logo

Graco Infant Restraint/Carrier User Manual

Graco Infant Restraint/Carrier
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2005 Graco ISPC065BA 07/05 US
Infant Restraint/Carrier
Owner’s Manual
Read this manual
KEEP INSTRUCTIONS FOR FUTURE USE.
Even if using this infant restraint seems easy to figure out on
your own, it is very important to READ, UNDERSTAND
AND FOLLOW THE OWNER’S MANUAL.
Failure to properly use this infant restraint increases the risk of
serious injury or death in a sudden stop or crash.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Graco Infant Restraint/Carrier and is the answer not in the manual?

Graco Infant Restraint/Carrier Specifications

General IconGeneral
Weight Capacity4-35 lbs
Height LimitUp to 32 inches
Rear-Facing OnlyYes
Car Seat Base IncludedYes
LATCH CompatibleYes
Removable Infant InsertYes
Travel System CompatibleYes
TypeInfant Car Seat
Harness Type5-point
Recline PositionsMultiple
Stroller CompatibleYes

Summary

Warnings to Parents and Other Users

General Safety Warnings

Critical safety precautions for proper use and installation of the infant restraint.

Registration and Recall Information

Register Your Infant Restraint

Steps to register the product for safety recall notifications.

Recall Information and Help

Contact details for product recalls and customer support.

Important Information

Warnings for Use as Infant Restraint

Essential warnings regarding installation, air bags, and child safety.

Warning for Use With a Stroller

Guidelines for compatible stroller usage and safety.

Additional Warnings for Use as Carrier

Safety precautions for using the restraint as a carrier, addressing fall and suffocation risks.

Height and Weight Limits

Specifies the weight and height range for safe use of the infant restraint.

Features and Components

Infant Restraint Components

Identification of key parts of the infant restraint system.

Rear View and Indicators

Identification of components visible from the rear, including level indicator.

Base Unit and LATCH System

Identification of parts of the base unit and the LATCH system.

Handle Adjustment and Restraint Attachment

Instructions on adjusting the handle and removing/attaching the restraint.

Attaching the Canopy

Step-by-step guide for attaching the canopy accessory.

Head Support Options

Guidance on using or improvising head support for infants.

Cold Weather Boot Attachment

Instructions for attaching the cold weather boot accessory.

Using Infant Restraint

Positioning Harness Straps

Instructions for correctly positioning and adjusting the harness straps.

Harness Adjustment Details

Detailed steps for adjusting harness straps and performing safety checks.

Harness Slot Selection

Guidance on choosing appropriate harness slots for different baby sizes.

Waist Strap Adjustment

Instructions for shortening or lengthening the waist straps.

Securing Child in Infant Restraint

Buckling and Securing Child

Step-by-step instructions for securing the child with the harness.

Harness Clip and Tightening

Steps for fastening the harness clip, tightening straps, and final checks.

Choosing Vehicle Seat Location

Vehicle Seat Requirements

Critical guidelines for selecting a safe seating position in the vehicle.

Vehicle Seat Belt Requirements

Information on compatible vehicle seat belt systems.

UNSAFE Vehicle Belt Systems

Identifies vehicle belt systems that should not be used with the restraint.

SAFE Vehicle Belt Systems

Identifies vehicle belt systems that can be safely used with the restraint.

SAFE Belt System Examples

Illustrations of safe lap belts and combination lap/shoulder belts.

Sliding Latch Plate and Locking Clip

Details on using sliding latch plates and installing a locking clip.

LATCH Locations

Explanation of LATCH anchor systems and how to find them.

How to Install the Infant Restraint/Base

Install Restraint Without Base Using Belt

Step-by-step guide to installing the infant restraint using only the vehicle belt.

Install Restraint and Base Using Belt

Instructions for installing the restraint and base using the vehicle belt and lock-off.

Using Base Lock-off

Details on securing the base with the lock-off mechanism.

Securing Restraint to Base

Steps for attaching the infant restraint to the base and checking the connection.

Install Base Using LATCH

Step-by-step guide to installing the base using the LATCH system.

Reclining Infant Restraint/Base

Importance of proper recline and using the level indicator.

Adjusting Recline

Instructions for adjusting the recline angle using the base foot or a towel.

Final Safety Check

Performing a final check to ensure secure installation every time.

Additional Information

Airplane Usage

Guidance on using the infant restraint on an airplane.

Storing LATCH

Instructions for properly storing LATCH connectors when not in use.

Cleaning and Maintenance Procedures

Instructions for removing and washing the infant restraint pad.

Cleaning Precautions and Care

Cleaning methods for different parts and general use precautions.

Parts and Warranty Information

Contact information for purchasing parts or obtaining warranty details.

Related product manuals