Graco Infant Restraint/Carrier - Securing Restraint to Base

6. Push the infant restraint down into the base
and make sure that you hear a “click” .
Pull up on the infant restraint to be sure it
is latched securely into the base.
If the infant restraint does not securely latch
into the base, the infant restraint provides
NO protection for your child. DO NOT use
the infant restraint/base if the infant restraint
does not securely latch into the base.
7. Test infant restraint for secure
installation as described in infant
restraint “Final Safety Check” page.40 .

36