36
7.3 Cleaning and Maintenance
TO REMOVE AND WASH INFANT RESTRAINT PAD, follow
instructions in “6.1 Positioning Harness Straps”, p. 24-25.
Carefully remove the seat pad. Machine wash on delicate cycle and
drip-dry. DO NOT USE BLEACH.
Reverse steps to reinstall seat pad. Check that harness system is not
twisted, and pull on harness system to be sure harness is securely
reinstalled.
INFANT RESTRAINT METAL AND PLASTIC PARTS may be
cleaned by wiping with a mild soap and water solution. DO NOT USE
BLEACH. Use of bleach may weaken plastic parts.
HARNESS STRAPS may be spot cleaned or replaced. DO NOT
IMMERSE THE HARNESS STRAPS IN WATER. Doing so may weaken
the harness straps.
BUCKLE may be cleaned with a damp cloth.
DO NOT LUBRICATE the buckle.
DO NOT USE INFANT RESTRAINT without seat pad.
CONTINUOUS USE OF INFANT RESTRAINT MAY CAUSE
DAMAGE TO VEHICLE SEAT. Use an infant restraint mat, towel
or thin blanket to protect upholstery.
To Next Page
Loading...
Need help?
General