Graco MODES 3 LITE User Manual

27
1. Place the infant restraint without base in a rear-facing
position in a vehicle seat.
2. Thread the lap belt or lap portion of a lap/shoulder belt under both
vehicle belt hooks:
3. Buckle the vehicle belt.
4. Tighten the vehicle seat belt.
To create a secure installation, push
down hard with your free hand on
the infant restraint Ì and pull and
tighten the vehicle belt.
5. Check infant restraint is level: Red level
line on the warning label MUST be
level with the ground .
6. Test infant restraint for secure
installation as described in infant
restraint “Final Safety Check” page 42.
Lap Belt
Ì

Lap/Shoulder
Belt

Graco MODES 3 LITE Specifications

General

Weight Capacity	50 lbs
Number of Riding Options	9
Harness Type	5-point
Storage	Large Storage Basket
Canopy	Adjustable canopy with peek-a-boo window
Compatibility	Compatible with all Graco infant car seats
Frame Material	Metal
Fold Type	Self-Standing Fold