Graco MODES 3 LITE User Manual

35
1. Remove infant restraint
from base and rotate handle
down to sitting position.
See “5.1 Adjusting Handle” and
“5.2 Removing and Attaching
Infant Restraint”, page. 23.
2. Place child in seat as shown Ê.
3. Determine which pair of harness slots are even
with or just below your child’s shoulders Ë.
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing
the following:
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR
YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP, OR
CRASH. The harness straps must be properly adjusted to fit your child
according to the following instructions.
7.0 Using Infant Restraint
7.1 Positioning Harness Straps
Ê
Use harness slots
even with or just below
child’s shoulders
Ë

Graco MODES 3 LITE Specifications

General

Weight Capacity	50 lbs
Number of Riding Options	9
Harness Type	5-point
Storage	Large Storage Basket
Canopy	Adjustable canopy with peek-a-boo window
Compatibility	Compatible with all Graco infant car seats
Frame Material	Metal
Fold Type	Self-Standing Fold