Graco Nautilus 2.0 User Manual

Important
1
Important
1
8
Cup holders MUST be installed.
Place the tab on the cupholder into the
corresponding slot on the base and rotate the cup
up and into position as shown. You will hear a
“CLICK” when they are secured in place.
Note: you may find it easier to install the cup
holders with the snaps on the back of the seat
undone.
Install Cup Holders (Adult Assembly Required)

Graco Nautilus 2.0 Specifications

General

Product Type	Convertible Car Seat
Weight Limit (Forward-Facing)	22-65 lbs
Weight Limit (Booster Mode)	40-100 lbs
Backless Booster Weight Capacity	40-100 lbs
Harness Type	5-point harness
Machine Washable Cover	Yes
Warranty	1 year limited warranty
Height Limit (Forward-Facing)	Up to 49 inches
Height Limit (Booster Mode)	43-57 inches
Installation Method	LATCH
Cup Holders	2
Width	20 inches
Recline Positions	3-position recline