46
9. Test For Tightness
Grab the sides of the seat where the vehicle
seat belt is and slide the car seat side-to-
side and front-to-back.
If the seat moves less than 1” (2.5 cm), it is
tight enough.
10. Check the Level Indicator
Vehicle MUST be on level ground. Ball must
be completely in the blue zone. Readjust if
needed.
For infants 3 months and under, the ball
must completely cover the light blue circle.
If needed, rolled towels may be placed under
the car seat at the vehicle seat crease, until
the ball is completely in the blue zone.
See section 5 to secure your child.
Recheck level indicator with child in seat.
LABEL NUMBER: PD349436A
DESCRIPTION:LABEL-CARSEAT-SEQUEL 65-LEVEL INDICATOR
LABEL MUST PASS GRACO LABEL SPECIFICATIONS
DIMENSIONS: 1.75" X 1.995"
DIE CUT DOES NOT PRINT
CORNERS: ROUNDED 0.2"
COLOR:
BACKGROUND: WHITE
TEXT: BLACK
OTHER:
PMS2726C, PMS2915C, RED PMS 192C
MATERIAL: 0.006" POLYPROPYLENE FILM (WITH CALCIUM CARBONATE)
6-PT POLYLITH RUSSEL-FIELD PAPER COMPANY OR EQUIVALENT
LOCATION: LEFT SIDE OF SEAT AS CHILD SITS IN PRODUCT BEHIND COVER
LABEL SPECIFICATIONS
To Next Page
Loading...
