To Next PageTo Next Page
Need help?Do you have a question about the Graco SNUGRIDE SNUGLOCK and is the answer not in the manual?
General| Weight Capacity | 4-35 lbs |
|---|---|
| Harness Type | 5-point harness |
| Category | Infant Car Seat |
| Rear-Facing | Yes |
| Car Seat Base Included | Yes |
| LATCH Equipped | Yes |
| Height Capacity | Up to 32 inches |
| Safety Features | Side-impact protection |
| Compatibility | Compatible with Graco Click Connect strollers |
| Safety Standards | Meets or exceeds US FMVSS 213 |
| Installation Type | Latch |
Provides a quick overview of the manual's sections and compatibility.
Essential steps before installation, including product registration for safety.
Covers crucial warnings about misuse, air bags, and general safety guidelines.
Identifies and labels key components of the infant car seat base.
Step-by-step instructions for detaching the car seat from the base.
Instructions for correctly securing the car seat onto the base.
Guide to adjusting the base for proper recline using the level indicator.
Guidance on selecting the safest seating position in the vehicle.
Explains the two primary methods for installing the car seat base.
Defines the Universal Anchorage System (UAS) and its components.
A step-by-step checklist for ensuring correct rear-facing installation.
Detailed instructions for installing the base rear-facing using the UAS strap.
Detailed instructions for installing the base rear-facing using the vehicle seat belt.
Further details on using the UAS system, including terminology like ISOFIX/LATCH.
Instructions for safely disconnecting the UAS connectors from the vehicle anchors.
Guidance on properly storing the UAS strap when not in use.
Identifies vehicle seating positions that are not suitable for installation.
Explains how to use different vehicle seat belt types for installation.
