Graco SNUGRIDE SNUGLOCK - Rear-Facing Installation Checklist

3 Rear
Facing
19
UAS Strap
Vehicle Lap/Shoulder
Seat Belt
3-A Rear-Facing
Safe Use Checklist
Rear-Facing*:
• Base MUST be rear-
facing in the vehicle
back seat.
• Make sure UAS strap
or vehicle seat belt is
routed through the rear-
facing belt path, marked
with a blue label.
• Install this base tightly
in your vehicle. Base
should not move at the
belt path more than 2.5
cm (1 in) from side to
side and front to back.
• Make sure to check the
level indicator or level
line for proper recline.