Graco SNUGRIDE SNUGLOCK - How to Remove Car Seat from Base; How to Attach Car Seat to Base

2 Features
14
1. Attaching Car Seat To
Base
Align the locking bar at
the front of the car seat
with the locks in the
base. Set car seat in the
base. Push down on the
front of the car seat. You
will hear a “click” when
it is locked.
Pull up on the front
corners of the seat to
make sure it is locked.
2-B Remove Car Seat from Base
1. To Remove Car Seat
from Base
From the back of the car
seat, squeeze the base
release handle and then
lift the car seat out of the
base.
2-C Attach Car Seat to Base
CLICK!
2
1