EasyManua.ls Logo

Graco SNUGRIDE 35 LITE LX - Rear-Facing Installation and Use; Rear-Facing Installation Checklist

Graco SNUGRIDE 35 LITE LX
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Rear
Facing
24
3-A Rear-Facing Checklist
Rear-Facing:
4-35 lb (1.8-
16 kg) 32”
(81 cm) or less
• Car seat MUST be rear-
facing in the vehicle back
seat.
• Make sure Lower anchor
attachment strap or
vehicle seat belt is routed
through the rear-facing
belt path, marked with a
blue label.
• Install this car seat tightly
in your vehicle. Car seat
should not move at the
belt path more than 1”
(2.5 cm) from side to side
and front to back.
• Make sure to check the
level indicator or level line
for proper recline.
• Harness straps must be
at or just below the top
of child’s shoulders and
chest clip must be at
armpit level.
• Make sure base is a
minimum of 80% on
vehicle seat.
Lower anchor attachment
Strap
Vehicle Lap/Shoulder
Seat Belt

Table of Contents

Related product manuals