A S S E M B L Y I N S T R U C T I O N S
PRINTED IN CHINA
HARDWARE AND TOOLS DIAGRAM
1
LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848
Bulletin No. A-RTAUPS01-00
Convertible Crib
Adult assembly required. Small parts may present prior to assembly.
PARTS LIST
REF. PART NAME QUANTITY
A. Crib Ends(Top) 2
B. Crib Ends(Bottom) 2
C. Front Leg 2
D. Dropside Rail 1
E. Back Rail Top 1
F. Back Rail Middle 1
G. Back Rail Bottom 1
H. Back Rail Leg 2
I. Wooden connecting block 3
J. Bottom Stretcher 1
K. Metal Spring support platform 1
L. 3 1/4 " Bolt 14
M. 2 1/4" Bolt 2
N. 1 1/2" Bolt 4
O. 3/4" Bolt 4
P. Barrel Nuts 16
Q. Allen Wrench 1
R. Wood Dowels 30
S. Casters 4
T. Block brake 2
U. Wood Screws 3/4″ 12
M
L
Enclosed please find simple step-by-step instructions to help you quickly assemble your product. Before you begin we
recommend that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware.
3. You will need the following tools:
Philips Head screw driver
Flat head screw driver
Hammer.
To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth.
Do not use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating.
3 1/4" Bolt
Barrel Nuts
Allen Wrench
Casters
Block brake
Wood Dowel
2 1/4" Bolt
3/4" Bolt
N
O
Model shown is example only.
Styles may vary.
Wood Screw 3/4″
T
P Q
R
S
1 1/2" Bolt
U
To Next Page
Need help?
General
