Need help?Do you have a question about the Graco Table2Table LX and is the answer not in the manual?
General| Product Type | High Chair |
|---|---|
| Convertible | Yes |
| Harness | 5-point |
| Recline Positions | 3 |
| Foldable | Yes |
| Tray Dishwasher Safe | Yes |
| Wheels | Yes |
| Tray | Removable |
| Height | 43 inches |
| Seat Material | Machine-washable fabric |
Details risks of falls and the importance of using restraints.
Specifies limits for highchair, booster, and stool modes.
Warnings on assembly, tray use, and strangulation risks.
Describes the infant highchair with recline functionality.
Details the standard full-size highchair configuration.
Information on using the product as an infant booster.
Features of the toddler booster seat.
Details about the product as a youth stool.
Description of the product as a table and chair set.
Lists all parts common to all product models.
Highlights features that may vary by specific product model.
Steps to attach the upper rear leg pieces to the seat.
Instructions for attaching the lower rear leg tubes.
Steps to connect front leg tubes with wheels.
How to attach the leg crossbar to the front wheels.
How to detach the toddler booster seat.
Steps to insert the seat back into the seat bottom.
Ensuring the seat back is securely attached.
How to insert waist straps into the seat back slots.
Threading waist straps through the seat pad.
Threading the crotch strap through the seat pad.
How to attach hooks to the underside of the seat.
Connecting hooks from the seat pad to the seat back.
Aligning harness mounts with the booster seat back.
How to position the infant booster onto the youth stool.
Verifying the booster is securely latched in place.
Instructions for safely removing the infant booster.
Steps to squeeze handles or press button to attach the tray.
How to fix the tray insert onto the main tray.
How to lift the tray off the highchair.
Steps to squeeze handles or press button to release the tray.
Using the infant highchair in recline mode.
Using the full-size highchair in an upright position.
How to operate the recline handle on the seat back.
Information on the available recline positions.
Specifies the dimensions of the adult chair for booster use.
Age and weight limits for the infant booster.
Flipping the seat to access strap storage.
Sliding open the doors for strap compartments.
Extending the attachment straps from storage.
Positioning the booster on an armrest-free chair.
Securing the rear straps around the chair back.
Securing bottom straps around the seat base.
How to attach the tray to the infant booster.
Specifies adult chair dimensions for toddler booster use.
How to disconnect the hooks from the seat.
Threading straps through the seat pad.
Steps to remove the backrest from the booster base.
Flipping the seat to access strap storage.
Positioning booster on a chair without armrests.
Securing rear straps around the seat back.
Securing bottom straps around the seat base.
Placing straps into designated storage areas.
Sliding the storage doors closed.
How to press the buckle button to release waist straps.
Sliding connectors to buckle to close the harness.
How to use slide adjusters for tighter strap fitting.
Steps to remove shoulder straps for a 3-point configuration.
Taking off the upper seat pad to access straps.
Pulling harness straps through the seat pad slots.
Aligning strap ends to remove them from the seat back.
Connecting waist straps to the harness buckle.
Using waist adjusters for fine-tuning fit.
Pressing buckle to release shoulder straps.
Threading straps through the seat pad slots.
Moving shoulder straps to different slots in the seat back.
Ensuring shoulder straps pass through correct slots.
Verifying shoulder strap ends are visible from the back.
Specifies age and weight for youth stool use.
Instructions for seating a child in the youth stool.
How to push the youth stool under a table.
Steps to flip the chair and detach the wheel cross bar.
Pressing buttons to remove the lower parts of rear legs.
Repeating the process for the front legs.
Flipping the seat to form the big kid chair.
Pulling levers to detach the tray from the booster.
Flipping the tray to access leg openings.
Aligning and inserting the right front leg with wheel.
Aligning and inserting the left front leg with wheel.
Verifying front legs are securely attached.
Inserting rear legs into tray openings.
Verifying rear legs are securely attached.
Turning the assembled table upright.
Pressing buttons on the tray to remove legs.
Repeating the leg removal for the other set.
Removing straps from the head support openings.
Detaching hooks from the bottom of the seat.
Threading the crotch strap through the seat pad.
Threading waist straps through the seat pad.
Steps to remove the backrest using the lever.
Detaching the seat back from the seat base.
Disconnecting hooks from the seat back.
Removing the seat pad from the seat back.
Detaching webbing tabs from the seat back.
Threading shoulder straps through the seat pad.
Verifying correct installation of waist straps.
Ensuring waist straps pass through pad, back, and base.
Ensuring shoulder straps are in correct pad and back slots.
Checking for worn parts, tears, or loose stitching.
Instructions for cleaning the frame with soap and water.
Guidance for washing the seat cover per care tag.
Contact information for parts and warranty in the US.
Contact information for parts and warranty in Canada.
Instructions for registering the product online or by mail in the USA.
To Next Page
