Graco Table2Table - Assembly Instructions; Assembling the Highchair

11
ಢ၆
3-A 組裝高腳椅 Assembling Highchair
Flip toddler-sized seat over, press
down buttons on legs and insert
top rear legs into holes in seat
as shown. CHECK that legs are
secured by pulling up on them.
喀擦!
SNAP!
Attach bottom rear leg tubes
(without wheels) over top rear
legs tubes.
CHECK that buttons snap into
place as shown.
喀擦!
SNAP!
喀擦!
SNAP!
喀擦!
SNAP!
1. 如圖所示，將孩童餐椅翻轉至
底部朝上，按下椅腳上段的
按鈕，將後椅腳上段插入座
椅孔。向上拉動，確認椅腳
已確實固定。
2. 將後椅腳下段（無輪）接到後
椅腳上段。如圖所示，確認
按鈕確實卡入定位。