Graco Table2Table - Page 36

36
ٺҢПݲ
Line right front leg (with wheel)
that has R on it up with the
opening with R next to it on tray.
Angle leg inward as shown and
insert into front opening in bottom
of tray. Repeat on left front leg
(with wheel) with L on it.
CHECK legs are attached by
pulling up on them.
Angle rear legs (without wheels)
inward as shown and insert into
rear openings in bottom of tray.
CHECK legs are attached by
pulling up on them.
SNAP!
喀擦!
SNAP!
6. 將標有 R 字樣的右前桌腳 (附
輪)，對準餐盤上旁邊標有 R
字樣的導孔。如圖所示，將
桌腳角度稍微朝外，斜插進
餐盤底部的前方導孔。在標
示有 L 字樣的左前桌腳 (附輪)
上重複相同動作。
7. 向上拉動，確認桌腳已確實固
定。
8.如圖所示，將後桌腳 (無輪) 的
角度稍微朝外，斜插進餐盤
底部的後方導孔。
9. 向上拉動，確認桌腳已確實固
定。