Models
2 309524L
Models
Hazardous Location Heaters
Non-hazardous Location Heaters
Part No.
Series
VAC (50/60 Hz single phase) / Watts / Amps
Approvals
245848 A 120 / 2300 / 19.2
Approved Exd II T2 482°F (250°C)
Certificate No. ISSeP 07ATEX034X
Approved to EN 60079-0:2006 (IEC 60079-0:2004)
and EN 60079-1:2007 (IEC 60079-1:2007) for
Hazardous Locations, Temp Code T2 482°F
(250°C). See Technical Data, page 28, for
additional information.
CSA Certified and FM Approved as flame proof for
Class I, Division 1, Group D Hazardous Locations,
Temp Code T2 482°F (250°C), -20°C < T amb <
135°F (57°C). See Technical Data, page 28, for
additional information.
245863 A 240 / 4000 / 16.7
245864 A 480 / 4000 / 8.30
245862 A 200 / 4000 / 20.0
Approved Exd II T2 482°F (250°C)
Certificate No. ISSeP 07ATEX034X
Approved to EN 60079-0:2006 (IEC 60079-0:2004)
and EN 60079-1:2007 (IEC 60079-1:2007) for
Hazardous Locations, Temp Code T2 482°F
(250°C). See Technical Data, page 28, for
additional information.
CSA Certified as flame proof for Class I, Division 1,
Group D Hazardous Locations, Temp Code T2
482°F (250°C), -20°C < T amb < 135°F (57°C). See
Technical Data, page 28, for additional information.
246254 A 380 / 4000 / 10.5
Model No.
Series
VAC (50/60 Hz single phase) / Watts / Amps
Approvals
245867 A 120 / 2300 / 19.2
245868 A 200 / 4000 / 20.0
245869 A 240 / 4000 / 16.7
245870 A 480 / 4000 / 8.30
246276 A 380 / 4000 / 10.5
II 2 G
II 2 G
Conforms to
UL Std. 61010-1
CSA Std. 22.2 No. 1010-1-92
To Next Page