17
DE
EN
FR
NL
OPERATION
● Take hold of the
base station and un-
wind the cable as far
as it goes.
● Plug the plug into
the electric socket.
● Open the lid and ll
the unit with water.
● Fill in 1 litre maxi-
mal.
● Close the lid.
● Put the unit back
onto the base sta-
tion and push the
ON-/OFF switch.
The indicator lights
blue and the unit is
switched on.
Important: Do not open the lid during the boiling process.
Make sure you do not exceed the internal maximum lling level mark.
Fill the unit so that the water level is denitely between the minimum
and maximum indicator line.
● As soon as boiling stops, the unit automatically shuts off.
● The indicator light extinguishes.
● If desired, you can press the on/off switch again to boil the water
To Next Page
Loading...
