Need help?Do you have a question about the Gram Precision CM-6 Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Auto-off | Yes |
| Units | g, oz, lb |
| Calibration | External |
| Power Source | AC Adapter |
Details on the scale's power consumption in different operating modes.
Information on the scale's battery life after a full charge.
Procedure to display the scale's main-board version number.
Explanation of the scale's LCD display elements and indicators.
Detailed description of the scale's keyboard layout.
Explanation of the primary and secondary functions of each key.
Procedure to set a tare value for the scale.
Setting high and low weight limits for check weighing.
How to accumulate, display, and clear weight readings.
Entering sample quantity and activating the piece counting mode.
Introduction to different types of standard calibrations available.
Procedure for performing zero and span weight calibration.
Procedure for performing zero point calibration.
Procedure for performing span calibration.
How to view the scale's internal value parameter.
Configuring high and low weight limits for check weighing.
Configuring the automatic power-off timer for the scale.
Adjusting the display backlight settings.
Configuring the HOLD function for displaying weight.
Configuring RS-232 communication format and baud rate.
Selecting the transmission format for RS-232 output.
Setting the Analog-to-Digital Converter update speed.
Configuring how zero weight is displayed.
Performing gravitational calibration for higher accuracy.
To Next Page
