Seat functions and operation
28
GB
Lateral isolator *
Under certain operating conditions, it is useful
to activate the lateral isolator. This means that
lateral shock impacts can be better absorbed
by the driver's seat.
The cushioning effect can be activated with
the help of this locking lever.
0 lateral isolator OFF
1 lateral isolator ON
Internal safety system
If a power-consuming element fails, the
internal safety system should be checked first.
When viewing in the direction of travel, the
fuses are located in the area of the rear
suspension in the upper left, covered by the
bellows.
Before a fuse can be replaced, the bellows
must be removed on the upper side of the
suspension in the left rear area. Then the
defective fuse can be removed and replaced
by a new one.
Protection: 15A
î
You can identify a blown fuse when its
wire has melted; a blown fuse must always be
replaced by a new one of the same color and
with the same Ampere value.
Do not bridge a blown fuse and
do not replace it by a fuse of
different color or with a different
Ampere value; otherwise the seat
may catch fire caused by
overloaded electrical lines.
* if fitted ** depending on model *** optional extra
93
1
0
923
To Next Page
Loading...