Grammer MSG 90.6PG - Page 122

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.7 Bowden pull wire and button for quick lowering of the seat –
removal and installation
Page 3 of 6
REMOVAL / INSTALLATION TABLE OF CONTENTS
5 Mark the installation position of the
Bowden pull wire for quick lowering of
the seat (1) prior to removal.
Installation note:
Place the Bowden pull wire for quick
lowering of the seat (1) according to
the marking.
6 Loosen the lock washer (10) at the
Bowden pull wire (1).
7 Detach the Bowden pull wire (1) at the
retainer (11).
8 Remove the Bowden pull wire (1) from
the valve lever (9).
Note:
For easier removal of the Bowden pull
wire (1), press the retracting spring (8)
against the Bowden pull wire (1)
(strain relief).
11
98
10
1
13
14
1
12
5
F
F
15
1
15
6
4
16
2
4
2
5
6
1
1
7
3
2176