Grammer MSG 90.6PG - Page 147

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.11 Bowden pull wire and lever for vertical shock absorber adjustment –
removal and installation
Page 5 of 7
REMOVAL / INSTALLATION TABLE OF CONTENTS
10 Pull the Bowden pull wire (1) out of
the seat suspension in backward
direction.
11 Pull out the clip (13) at the seat
frame (12).
12 Remove the Bowden pull wire (1)
from the clip (13).
13 Remove the Bowden pull wire (1)
from the support (2).
Installation note:
Hang the Bowden pull wire (1) into
the lower clamp of the support (2).
14 Loosen the lock washer (17) at the
Bowden pull wire (1).
13
12
1
1
6
10
9
8
5
4
7
11
14
15
16
17
18
1
3
3
2
12
14
1
7
2
1
2181