Grammer MSG 90.6PG - Page 160

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.13 Bowden pull wire and lever for backrest adjustment –
removal and installation
Page 6 of 6
REMOVAL / INSTALLATION TABLE OF CONTENTS
13 Loosen the lock washers (8) at the
left Bowden pull wire (1) and at the
right Bowden pull wire (2).
14
Detach the left and right Bowden pull
wires (1, 2) at the holder (5).
Installation note:
Adjust the new Bowden pull wires
(1, 2) to the lengths of the old
Bowden pull wires (1, 2) (excess
length of the wire).
15 Re-install the components in the
reverse order of their removal.
5
1
2
1
2
4
8
5
1
7
2
7
4
3
5
6
2
8
1
8
2184