Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.14 Bowden pull wire for locking mechanism of the fore/aft isolator –
inspection and adjustment (delivery option)
Page 3 of 5
3.2 The retracting spring (8) must lock
the stop lever (7) into the clamp (10)
(arrow direction "e"). If necessary,
slightly move the upper suspension
part (9).
3.3 The upper part of suspension (9)
should not horizontally move after
being engaged.
4 Checking the unlocking function
of the fore/aft isolator (B):
4.1 Turn the lever for fore/aft isolator (1)
to arrow direction "c"(unlocked) until
the lock (5) locks down the eccentric
(3) in the longitudinal hole.
2202
c
2
1
3
5
4
B
13
12
11
9
10
1
14
4
B
9
7
d
8
15
e
To Next Page
Loading...
