Grammer MSG 90.6PG - Page 167

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.15 Bowden pull wire for locking mechanism of the fore/aft isolator –
removal and installation (delivery option)
Page 2 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
3 Seat with operator console and
armrest for electro-pneumatic
gearshift:
Remove the operator console for the
electro-pneumatic gearshift (see
Chapter 3.25).
4 Remove the entire covering
(Chapter 3.5).
Removal and installation
5 WARNING Risk of crushing!
Bring the seat into the highest position
and secure the swinging structure to
the front plastic rollers of the lower
suspension part by means of
appropriate spacers.
1
8
10
11
9
5
4
3
1
8
2
1
6
7
8
1
3
1
8
5
4
2203