Grammer MSG 90.6PG - Page 186

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.18 Handle rail – removal and installation
Page 4 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
9 If the Bowden pull wire for vertical
shock absorber adjustment (5) is
defective:
Remove the Bowden pull wire for
vertical shock absorber adjustment
(see Chapter 3.11).
10 If the Bowden pull wire for vertical
shock absorber adjustment (5) is
not defective:
Remove the Bowden pull wire for
vertical shock absorber adjustment
at the handle rail (see Chapter 3.11).
11 Detach the handle rail (1).
12 Re-install the components in the
reverse order of their removal.
3
4
5
5
4
1
4
5
3
3
2
2
2185