Grammer MSG 90.6PG - Page 185

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.18 Handle rail – removal and installation
Page 3 of 4
REMOVAL / INSTALLATION TABLE OF CONTENTS
5 If the Bowden pull wire for quick
lowering of the seat (4) is defective:
Remove the Bowden pull wire for
quick lowering of the seat (see
Chapter 3.7).
6 If the Bowden pull wire for quick
lowering of the seat (4) is not
defective:
Remove the Bowden pull wire for
quick lowering of the seat at the
handle rail (see Chapter 3.7).
7 If the Bowden pull wire for seat
height adjustment (3) is defective:
Remove the Bowden pull wire for seat
height adjustment (see Chapter 3.9).
8 If the Bowden pull wire for seat
height adjustment (3) is not
defective:
Remove the Bowden pull wire for seat
height adjustment at the handle rail
(see Chapter 3.9).
3
4
5
5
4
1
4
5
3
3
2
2
2185