Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.30 Backrest – removal and installation
Page 6 of 13
Removal
10 Unscrew two micro-encapsulated
cap screws (3) from the right and left
hexagon nut (4).
Installation note:
Replace the micro-encapsulated cap
screw (3), 25 Nm.
11 Temporarily reinstall the lever for
backrest adjustment to unlock the
backrest (7) (see Chapter 3.13).
12 Fold the backrest (7) forward and
secure it in this position.
10
F
F
F
F
2
12
3
4
5
9
8
7
11
1
6
3
2220
To Next Page
Loading...
