Grammer MSG 90.6PG - Page 266

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.31.1 Backrest cover – removal and installation
Page 2 of 5
REMOVAL / INSTALLATION TABLE OF CONTENTS
1 Lift off the seat cushion in position for
repair (Chapter 3.1).
2 Remove the left covering in position
for repair (Chapter 3.4).
3 Remove the covering at the back (see
Chapter 3.5).
4 Seat with armrests:
Remove the armrests (Chapter 3.24).
5 Pull off the lever for backrest
adjustment at the bolt (see
Chapter 3.13).
Note:
Left and right Bowden pull wires need
not be taken off at the lever for
backrest adjustment.
1
2
3
3
4
5
7
4
1
6
5
66
6
6
5
5
1
6
7
2232