Grammer MSG 90.6PG - Page 269

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.31.1 Backrest cover – removal and installation
Page 5 of 5
REMOVAL / INSTALLATION TABLE OF CONTENTS
Installation notes:
• When installing a new backrest
cover (1), cut in the holes for the belt
guide and belt bracket mounting.
• Put the backrest cover (1) to top of
the headrest and evenly pull it onto
the foam plastic part (2) from top to
bottom.
• When pulling the backrest cover (1),
release the tension by compressing
the foam plastic part (2).
11 Re-install the components in the
reverse order of their removal.
1
2
3
3
4
5
7
4
1
6
5
66
6
6
5
5
1
6
7
2232