Grammer MSG 90.6PG - Page 279

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.32 Bearing support with backrest locking mechanism and hook-in
function – removal and installation
Page 4 of 14
REMOVAL INSTALLATION TABLE OF CONTENTS
4 Remove the entire covering
(Chapter 3.5).
Note:
For seat models with fore/aft isolator,
remove only the left and right
covering. Do not remove the front
covering.
5 Remove the backrest (see
Chapter 3.30).
Notes:
• The seat belt remains installed and
the backrest is put down to the back.
• The electrical connections do not
have to be disconnected and the air
hoses do not have to be removed.
5
11
6
10
19
19
9
12
2
18
8
3
1
4
5
14
2
12
11
9
6
5
4
5
7
7
5
15
16
17
1
3
14
13
2233