Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.32 Bearing support with backrest locking mechanism and hook-in
function – removal and installation
Page 13 of 14
6 Tighten the rounded head screw (4) at
the right bearing support (3) and pull
the hexagon bolt (6) out again.
Installation note:
Rounded head screw (4), 6 Nm.
7 Install the backrest (see
Chapter 3.30).
8 Hang in the Bowden pull wires for
backrest adjustment at the left and
right catch elements and install the
lever for backrest adjustment (see
Chapter 3.13).
9 To align the backrest locking
mechanism, fold the backrest (10)
forwards and backwards several times
until the notching between the lock
(13) and the leaf (19) stays in
alignment.
5
11
6
10
19
19
9
12
2
18
8
3
1
4
5
14
2
12
11
9
6
5
4
5
7
7
5
15
16
17
1
3
14
13
2233
To Next Page
Loading...
