Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.38 Level control – removal and installation
Page 6 of 6
15 Detach the level control first with the
right clamp (6) and then with the left
clamp (7) at the centre axle (4) of
the swinging structure (2).
Installation note:
During installation, make sure that
the bracket (8) is hung into the lower
front axle (5) of the swinging
structure (2).
16 Remove the level control (1) from
the seat in upward direction.
Installation note:
If the new air hose to the air spring
(9) is not yet preassembled at the
new level control (1), the air hose (9)
has to be mounted at the level
control (1) prior to installation (see
Chapter 3.22).
17 Re-install the components in the
reverse order of their removal.
4
1
3
6
7
1
0
8
1
1
5
9
2
P
R
Z
2
1
3
5
4
2
6
7
8
1
R
P
Z
9
11
10
2240
To Next Page
Loading...
