Grammer MSG 90.6PG - Page 328

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.39.2 Supporting structure – removal and installation (Atego, Axor)
Page 1 of 2
REMOVAL / INSTALLATION TABLE OF CONTENTS
(1) Supporting structure
(2) Micro-encapsulated cap
screw .................. to replace, 25 Nm
(3) Lower suspension part
1 Remove the seat fore/aft adjustment
at the supporting structure (see
Chapter 3.40).
Note:
The pin contact strip does not need to
be removed from the supporting
structure.
2
2
2
2
2
2
3
1
1
2244