Notes on these instructions
This repair manual includes information and instructions on how to perform repair work on the GRAMMER Seat MSG 90.6 PG
of the following seat models:
• Actros
• Atego, Axor
• Bus seat
• Seat with climate control system
The seat Actros forms the basis for illustrations in this repair manual. In general, the seat is illustrated with a mechanism for
quick lowering of the seat, and not with a swivel.
In the case of technical deviations in work procedures (due to different seat models), refer to the current text or individual
chapters of the manual.
The functions can either be on the left-hand or right-hand side of the seat. The only difference between the commercial vehicle
type with a quick lowering mechanism and the bus seat is the missing swivel. For this reason, the repair work on the bus seat
is identical to that on the vehicle of type Actros and is to be performed laterally reversed. The repair work concerning the
is described in a separate chapter.
Each chapter starts with a list of all preparatory work to be completed before starting repair. These preparations are described
in separate chapters and shall be carried out without the preparatory steps described there.
To Next Page
Loading...
