18
HOW TO USE EXTERNAL
SPEAKERS
1. First, ensure that you have a stereo receiver with RCA
inputs.
NOTE: RCA cables are not included.
2. Connect RCA cables from your stereo receiver into
the RCA outputs on the Floating Record.
3. The onboard speakers on the Floating Record will still
be active, even while connected to an external speaker
system. You can mute the onboard speakers by pressing
the “Mute” button on the back of the base.
4. When using external speakers, the volume must be
controlled via the external system, not the onboard
volume knob.
To Next Page
Loading...