159
Slideout Systems
HYDRAULIC SLIDEOUT SYSTEM MAINTENANCE
It is recommended that when operating in harsh environments
(road salt, ice buildup, etc.) the moving parts can be kept
clean and can be washed with mild soap and water No grease
or lubrication is necessary and in some situations may be det-
rimental to the environment and long term dependability of the
hydraulic slide system.
Although the system is designed to be almost maintenance
free, actuate the slideouts and jacks once or twice a month to
keep the seals and internal moving parts lubricated. Check for
any visible signs of external damage or “leakage” before and
after movement of the slide. When the rooms are out, visual-
ly inspect the exterior inner and outer ram assemblies of the
slideout located underneath the room. Also inspect around
the shoe of the leveling jacks for signs of leakage. Check for
excess buildup of dirt or other foreign materials; remove any
debris that may be present.
If the hydraulic slide system squeaks or makes any noises,
it is permissible to apply a coat of lightweight oil or graphite
powder to the drive shaft and roller areas of the slideout only,
but remove any excess oil so dirt and debris do not build-up.
DO NOT use grease.