Caution! Before you turn on the Grand Effects System, make sure that it is clear or
people, animals or any objects that are combustible.
Operating Instructions:
To turn unit “On”:
1. Turn Burner Power “On”.
To turn unit “Off”:
1. Turn Burner Power “Off”.
Note: If Burner fails to light, turn corresponding Burner Switch
in the Control Panel to the “Off” position then to the “On”
position. This will initiate a new trial for ignition.
7.0 Spare Parts
1/4” Pilot Solenoid
3/8” Main Solenoid
Ignition Module
To Next Page
Loading...