Grand Seiko 9R65 User Manual (English)

Questions and Answers:

D
dunnpamelaJul 28, 2025
Why does my Grand Seiko 9R65 gain or lose time?
- L
  Logan LopezJul 28, 2025
  There are several reasons why your Grand Seiko Watch might temporarily gain or lose time: * **Temperature:** Extremely high or low temperatures can affect accuracy. Return the watch to a normal temperature (between 5ºC and 35ºC) and reset the time. * **Magnetic Field:** Exposure to strong magnetic fields can also cause time discrepancies. Move the watch away from the magnetic source and reset the time. If the issue persists, contact your retailer. * **Impact or Vibrations:** Dropping the watch or exposing it to strong vibrations, such as during active sports, can impact its accuracy. Reset the time. If the watch doesn't return to normal accuracy, contact your retailer.
C
christopher40Aug 1, 2025
How to fix a Grand Seiko 9R65 Watch that stopped operating?
- J
  james43Aug 1, 2025
  If your Grand Seiko Watch stops operating, and the chronograph hands do not move, it is likely that the mainspring has not been wound. To resolve this, turn the crown to wind the mainspring and then reset the time. Regularly check the power reserve indicator and wind the mainspring as needed, whether you are wearing the watch or not.
P
Paul BakerAug 6, 2025
What to do if Grand Seiko 9R65 power reserve indicator doesn't move up?
- G
  Gloria PhamAug 6, 2025
  If the power reserve indicator on your Grand Seiko Watch isn't moving up even with daily wear, it could be due to wearing the watch for only a short period, or not moving your arm enough. Try wearing the watch for a longer period each day or manually wind the mainspring by turning the crown.
L
Larry MooneyAug 10, 2025
Why does the date change during daytime on my Grand Seiko 9R65 Watch?
- W
  wrightjohnAug 10, 2025
  If the date on your Grand Seiko Watch changes during the daytime, it means the time is set 12 hours ahead or behind. When setting the time, remember that the date changes at midnight. Ensure that AM/PM is correctly set when adjusting the hour hand.
L
Lisa BowenAug 14, 2025
What to do if my Grand Seiko 9R65 Watch stops even when power reserve is not zero?
- J
  Jason WelchAug 14, 2025
  If your Grand Seiko Watch stops even when the power reserve indicator isn't at “0,” the watch may have been exposed to low temperatures (below 0ºC). At temperatures below 0ºC, the watch may stop if the power reserve indicator is showing less than one-sixth of the power reserve. Turn the crown to wind the mainspring and reset the time.
C
Cheyenne GarciaAug 18, 2025
Why does the seconds hand move quickly when setting time on my Grand Seiko Watch?
- C
  Cory WhiteAug 19, 2025
  When you first start your Grand Seiko Watch, the seconds hand may appear to move faster than normal when setting the time. This is because it takes a little time for the speed-regulating unit to start operating, and it is not a malfunction. To set the time accurately, wait approximately 30 seconds after the seconds hand begins to move before setting the time.
G
george30Aug 22, 2025
What causes blur in the display of my Grand Seiko Watch?
- K
  kevin79Aug 22, 2025
  If you notice persistent blur in the display of your Grand Seiko Watch, it indicates that a small amount of water has entered the watch, possibly due to gasket deterioration. Consult the retailer from whom you purchased the watch.

Grand Seiko 9R65 Specifications

General

Movement	Spring Drive
Power Reserve	72 hours
Accuracy	±15 seconds per month
Jewels	30
Functions	Hours, Minutes, Seconds, Date
Case Material	Stainless Steel
Case Thickness	12.5 mm
Crystal	Sapphire crystal with anti-reflective coating
Water Resistance	100 meters
Bracelet Material	Stainless Steel
Dial Color	Silver
Case Diameter	40.0 mm
Clasp Type	Three-fold clasp with push button release