To Next PageTo Next Page
Need help?Do you have a question about the Grandhall TH09ALP and is the answer not in the manual?
General| Model | TH09ALP |
|---|---|
| Category | Gas Heater |
| Type | Patio Heater |
| Fuel Type | Propane/Butane |
| Material | Stainless Steel |
| Ignition Type | Piezo |
| Height | 2200 mm |
Get assistance with assembly, operation, and replacement parts.
Read manual, maintain safe distance, outdoor use only, avoid combustible materials.
Procedure for smelling gas: shut off, extinguish flame, and contact supplier.
Improper installation, adjustment, alteration, service, or maintenance can cause injury.
Do not store or use gasoline or flammable liquids near the appliance.
Appliance produces odorless carbon monoxide; use only in ventilated areas.
Do not store spare LP cylinders near the heater or in enclosed areas.
List of tools needed for assembly, including gloves, eyewear, and screwdriver.
Instructions for unpacking, using carton as a work surface, and checking parts.
Contact number for assembly questions and installation code compliance.
Alerts about combustible materials, children supervision, and qualified service.
Visual representation of all heater parts with numerical labels.
Detailed list of parts with keys, descriptions, part numbers, and quantities.
Information on how to order correct replacement parts for the heater.
Requirements for LP gas tank size, construction, valve compatibility, and handling.
Use supplied regulator/hose assembly; inspect for damage before each use.
Store tanks upright, outdoors, in a well-ventilated area, away from children.
Use on level surface, away from combustibles, do not leave unattended, cool before moving.
Do not store spare LP tanks near the heater; never fill beyond 80 percent.
Use reputable companies for tank exchange, ensuring OPD safety feature.
Procedure for leak testing using a soap solution; do not use open flame.
Instructions for securely attaching the LP gas tank to the heater.
Step-by-step guide to connect the regulator and hose assembly to the LP gas tank.
Procedure to check all gas connections for leaks using a soap solution.
Instructions for safely disconnecting the LP gas tank from the heater.
Step-by-step guide for safely lighting the gas heater, including manual lighting.
Steps to take if the heater does not light, including checking gas supply and purging air.
Procedure to purge air from the gas line or reset the regulator excess gas flow device.
Instructions to follow if a flashback fire occurs in or around the burner tube.
Instructions for thorough interior cleaning every 3 months, including burner inspection.
Washing exterior painted surfaces with mild soap and warm water.
Preserving stainless steel appearance and corrosion resistance with proper cleaning.
Location of serial and model numbers on the heater's CSA label.
Troubleshooting steps for igniting the heater, including air pockets and leak tests.
Explanation of humming sounds and causes of low flame or failure to light.
Guidance on positioning the heater outdoors, away from combustibles and in windy conditions.
Reasons why regulator/hose may not fit older LP gas tanks due to updated regulations.
Explanation of why stainless steel parts may rust and its effect on the heater.
Details on warranty periods for electrical and other heater parts.
Requirements for proving purchase date and submitting warranty claims.
Conditions and damages not covered by the limited warranty.
Contact information and restrictions for obtaining warranty service.
