EasyManua.ls Logo

grandimpianti EB10 User Manual

grandimpianti EB10
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
grandimpianti
®
Industrial Laundry Equipment
211/C
32037

USE AND MAINTENANCE
DRYER EB10 – EB15
G400 DRY ELECTRONIC CONTROL

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the grandimpianti EB10 and is the answer not in the manual?

grandimpianti EB10 Specifications

General IconGeneral
Brandgrandimpianti
ModelEB10
CategoryDryer
LanguageEnglish

Summary

1. Premise and Warranty

1.2 Prescriptions and Recommendations

Guidelines for safe and proper use, including user responsibilities, prohibitions, and appliance handling.

1.3 Warranty

2. Main Electrical Connection

3. Dryer Electric Connection

3.2 Making the Electric Connection

Step-by-step guide for phase connection, neutral, and earth wire, including fan rotation check.

5. Commissioning the Appliance

5.1 Appliance Positioning

Requirements for appliance placement, including space, surface, and avoiding static charges.

5.1.1 Environmental Conditions for Use

Specifies room conditions like temperature, humidity, and lighting for optimal appliance operation.

5.2 Vapours Evacuation Pipe Connection

Connection requirements for the exhaust pipe for electric and steam heating models.

5.2.1 Fresh Air Requirements

Details on required air change for the installation room, including minimum opening sizes.

5.3 Steam Supply Connection

5.4 Gas Connection and Installation

5.4.2 Flue Evacuation

Requirements for the exhaust flue, including length, material, and installation standards.

5.4.4 Flame Quality

5.4.5 Gas Leak Detection and Response

5.4.6 Modifying Gas Calibration

5.4.7 Valve Adjustment and Adaptation

5.4.7.1 Gas Pressure Adjustment

Detailed steps for qualified technicians to adjust gas pressure using a manometer.

5.4.7.2 Valve Adaptation and Destination Country

7. Installation Space and Machine Use

8. Dryer Functioning

8.1.1 Commissioning: Pressure Switch Calibration

Procedure for calibrating the pressure switch upon commissioning the appliance.

8.1.2 Cycle Selection and Start

Guide to selecting cycles, starting the machine, and programming optional parameters.

8.1.4 Start Cycle Procedure

8.1.6 Signals for Alarms and Anomalies

8.2.2 Filter Cleaning Hatch Management

8.3 Setting Work Parameters

8.6 Recommendations for Machine Use

9. Safety Procedures

9.2 Detailed Alarm Descriptions

Comprehensive explanation of machine alarms, their causes, and reset procedures.

10. Information Regarding Particular Systems

10.1 Maintenance/Repair Technician Instructions

Guidance for technicians on troubleshooting and localizing faults, covering common issues.

10.1.1 If the Machine Does Not Function

Checklist of items to verify when the machine does not start or function correctly.

10.1.2 Anomalies Linked to Extraction

Troubleshooting steps for extraction-related issues, including checking the flue and calibration.

10.2 Safety Devices Check

Instructions for checking the correct functioning of various safety devices.

13. Coin Operated/Central Payment Unit Versions

13.4.3 Electronic Coin Operation on Machine

Power Layout

Wiring Diagram

Related product manuals