Calls Ringtones
Advisory Tones
Advisory tones are acoustic signals, which inform you of different actions and states on your handsets. The following advisory
tones can be configured independently of each other:
Keypad tone: it’s played when a user presses any key of the keypad (even during calls).
Confirmation: it’s played when a user saves settings or places the handsets in the charger cradle.
Low battery: it’s played if the capacity of the batteries is low or the handsets require charging.
To configure the advisory tones
1. Press Menu (left softkey or the selection key) to bring up the operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Audio 🡪 Advisory tones, and choose which tone you want to change it.
4. Press the left and right arrow keys to either enable or disable the desired tones.
5. Press “Save” (left softkey) to confirm, and a message prompt will be displayed to confirm that the new settings have been
successfully saved.
Advisory Tone
Ringtones Customization
DP base stations allow users to use custom ringtones. Custom ringtones will be stored on the DP75x base station and only
selected custom ringtones will be downloaded to specific DP handsets.
DP75x base station supports up to 10 custom ringtones.
The custom ringtone should be generated using GS Ringtone Tool and named ring[1-10].bin (example: ring1.bin, ring6.bin).
To use custom ringtones, follow the below steps:
Step 1: Generate Custom Ringtone(s)
1. Download the “Grandstream IP Phone Custom Ringtone Generator” tool available at
https://www.grandstream.com/support/tools
2. Run the tool and select your ringtone file to convert.
To Next Page
Loading...
