This open door logic will make sure two doors are open in “One-Way” direction, at any given time only one door can be opened, and only one legal
open door request is allowed to execute.
The hallway or scene between two doors could be monitored by installing Grandstream IP cameras.
This feature can be used in application scene like: College Dorm, Bank Branches, Government Offices, Medical Clinics, Private Clubs, etc., where there
are two doors in place, high security and flow control is required (only one entry per time) but security guard may not be on site always.
Below is the illustrated drawing of the application scene as well as the wiring sample:
One-Way Interlocking Mode Diagram Example
Web Configuration
This option can be found under device web UI→Door System Settings. Below example configuration screenshots are for reference only, customers
need to test and get own parameters in field:
One-Way Interlocking Mode_GDS3710_Configuration_1
Note
If required to use the same two doors for “Exit” direction, another GDS3710 is required and it can be configured in Door 2 to control “Exit” direction. The
wiring/connection will be mirrored.
To Next Page
Loading...
